MenuSearch | Country: Ireland | Currency: EUR
SATA SSD/HDD/ODD Electrical Noise Filter II
Discontinued
More variations available Show

SOtM Audio SATA SSD/HDD/ODD Electrical Noise Filter II

The SOtM SATA Electrical Noise Filter II offers a significant reduction in electrical noise emanating from any hard disk, optical drive or SSD.

Incredibly high data transfer rates from modern drives can have a downside: increased EMI (electro-magnetic interference). This isn’t usually serious enough to worry the casual PC user, but as anyone who has tried to use a PC as a hi-fi component will tell you, the effect on audio quality from an adjacent sound card can be surprisingly detrimental.

High-end audio specialist SOtM are one of the few companies to have come up with a simple solution. Their answer is an in-line PCB filter which requires no software drivers or extra wiring - simply plug in and go. The SATA Electrical Noise Filter II is the second revision of their original product and offers increased filtering and smoothing. It is very effective at blocking electrical noise from any hard drive, optical drive or solid state disk. For best results, we recommend that a filter is attached to every drive in a PC system. The filter is designed to be connected directly to the drive and then the SATA power and data cables are connected to the filter.

Oscilloscope screen showing electrical noise from an unfiltered SSD (upper line) and filtered (lower line)
Oscilloscope screen showing electrical noise from an unfiltered SSD (upper line) and filtered (lower line)

Features

  1. Simple to install in-line SATA filter dramatically reduces EMI
  2. Gives a great reduction in noise from PC-connected sound cards
  3. Can be transferred to a new PC in the event of a future upgrade
  4. A must-have item for any PC audiophile enthusiast or studio engineer
  5. Fully signal-transparent. No software drivers or extra wiring required
SpecificationsSATA Filter
Product nameSOtM SATA Filter II
Filtering capabilities12V, 5V and 3.3V ripple and RF filtration
Designed forHDD, ODD and SSD
Data transparencyFully transparent - no drivers required
Dimensions40 x 55 mm
CompatibilitySATA-2 (3Gbps) and SATA-3 (6Gbps) *
Warranty24 months
  • *Note that only straight-through (not right-angled) SATA plugs should be used when using this product with SATA-3 devices
SpecificationsSATA Filter
Product nameSOtM SATA Filter II
Filtering capabilities12V, 5V and 3.3V ripple and RF filtration
Designed forHDD, ODD and SSD
Data transparencyFully transparent - no drivers required
Dimensions40 x 55 mm
CompatibilitySATA-2 (3Gbps) and SATA-3 (6Gbps) *
Warranty24 months
  • *Note that only straight-through (not right-angled) SATA plugs should be used when using this product with SATA-3 devices

See Also

Top Audio Accessories

Recently Viewed Products