Twin SSD Quick-Release Drive Caddy - ST-2223SATA € 23.50 6 in stock | ||
| More variations available Show | ||
Nofan Twin SSD Quick-Release Drive Caddy - ST-2223SATA
This aluminium quick-release caddy can be installed in a standard 3.5 inch (floppy drive) bay and will accommodate up to two 2.5 inch SATA drives providing an easy way to swap them in and out of the system.
Features
- Enables up to two SSD drives to be easily swapped in and out
- Fits into a standard 3.5” (floppy) drive bay
- Supports SATA 3 (6 Gb/s) drives
- Supplied with two SATA cables and four installation screws
- Each bay can be locked for security
- Excellent build quality (aluminium body)
- LED lights indicate power and drive activity
Sometimes it’s useful to be able to easily install or remove a hard drive or SSD in a desktop PC. Rather than fiddle about with screws and cables, this useful caddy from Nofan allows one or two 2.5” drives to be put in or taken out with the push of a button. Each drive slides easily in and latches into place, with no cables or screws to worry about. The caddy fits into a standard 3.5” (floppy) bay and once installed, makes it very easy to change drives for different PC functions, or remove them for security/storage.
Please note: After installing the caddy the SATA ports need to be configured as hot-swappable in the BIOS to function correctly.
Shown being fitted into a 3.5” bay
| Specifications | SSD Caddy |
|---|---|
| Product code | NOFAN-ST-2223SATA |
| Form factor | Accommodates up to 2 x 2.5” SSD/HDD in a standard 3.5” drive bay |
| Power connector | Single standard SATA 15-pin plug |
| Interface | SATA 3 (6 Gb/s) |
| Cables included | 2 x 60cm SATA data cables |
| Plug & Play | Yes |
| Material | Aluminium |
| Colour | Black |
| Dimensions (L x W x H) | 146 x 101 x 25mm |
| Weight | 230g |
| Warranty | 24 months |
| Specifications | SSD Caddy |
|---|---|
| Product code | NOFAN-ST-2223SATA |
| Form factor | Accommodates up to 2 x 2.5” SSD/HDD in a standard 3.5” drive bay |
| Power connector | Single standard SATA 15-pin plug |
| Interface | SATA 3 (6 Gb/s) |
| Cables included | 2 x 60cm SATA data cables |
| Plug & Play | Yes |
| Material | Aluminium |
| Colour | Black |
| Dimensions (L x W x H) | 146 x 101 x 25mm |
| Weight | 230g |
| Warranty | 24 months |
See Also
Top Case Accessories
Acousti AcoustiFeet Soft Anti-Vibration Feet ACF3007-20B
Acousti AcoustiFeet Firm Anti-Vibration Feet ACF3007-30B
FLIRC USB (version 2) - Use any Remote with your Media Center
Gelid PCI Slot Fan Holder with two slim 120mm UV Blue Fans
Quiet PC SupaHub PCIe to 4x Type A and 1x Type C USB Card
Streacom ST-BM1 Biometric Power Switch
Streacom Fanless GPU Cooler for ST-DB4 Chassis
Quiet PC Professional Grade Air Duster, 400ml CFC Free Aerosol
Gelid PCI Bracket with Removable Dust Filter, pack of 3
Gelid Mesh Magnet 140 Fan Dust Filter for 120mm fans, 3pcs
